Fast and easy operating single wire automatic chain link fence machine
can produce chain link mesh with wire diameter 1.5-4.5mm, mesh hole size 25 * 25-120 mm *120mm, the max mesh width can be adjustable by the machine. There are 2m,3m ,4m type , and 5m ,6m type machine can also be customized by you need.
Full automatic single wire diamond mesh making machine, one people can operate it very easily.
The advatagesas are followings:
1. It could work both of galvanized wire and pvc coated wire.
2. With alarm system for emergency matters occure.
3. Stop automaticlly.
4. With single wire feeding system.
5. It could adjust the mesh width automaticlly.
6. With high working efficiency and low noise.
Machine details:
Edge Treatment:
can be twist & twist,knucle & knucle, knucle & twist.
When the machine working, you can change as your need.
| single wire fully automatic chain link fence machine |
| | 2m chain link fence machine | 3m chain link fence machine | 4m chain link fence machine |
| wire diameter | 1.5-4.5mm | 1.5-4.5mm | 1.5-4.5mm |
| mesh size | 25-100mm | 25-100mm | 25-100mm |
| material | galvanized wire, pvc coated wire | galvanized wire, pvc coated wire | galvanized wire, pvc coated wire |
| width | 2m | 3m | 4m |
| knuckle or twist | Both are ok |
| capacity | 20-150m2/h |
| voltage | 380V/50HZ |
| motor | servo motor 3.8kw cutting machine 1.5kw table reverse motor 1.5kw locating pin motor 0.75kw border wire treating machine motor 1.5kw mesh rolling machine motor 1.5kw |
| type | full automatic |
| power | 4kw/h |
| mould | 4 sets molds for free |
| Size(L*W*H) | 3.8m *3.2m*1.5m | 4.8m *3.2m*1.5m | 5.8m *3.2m*1.5m |
| weight | 1.6T | 1.7T | 1.8T |
| Warranty | one year |
| operation | one person can operate two sets machines |
Machine Showing:
Our full-automatic single wire diamond mesh making machine is highly valued by our customiers!
Colors can be customized. The width can be also customized, Different types, different sizes.
Customer Visiting:
Loading:
Operating steps:
a. setting the machine;
b. connecting the wire;
c. let the machine working without wire ;
d. Installing the moulds to the machine;
c. bring some wire materials, let the machine work work with the wire to produce chain link mesh;
e. test the machine to produce chain link mesh normally or not;
